10 ml diluent vial racks with a 28 mm deep bore
The 10 ml vial is the diluent size on most peptide benches, and it is the size that gets knocked over most because it is tall and half empty. A 28 mm deep bore holds a 45 mm vial well past its center of mass.
PETG, ASA, or PLA. Bore held to about ±0.2 mm. Cut to your measured vial on request, at no extra charge.
10 ml rack dimensions
| Vial designation | 10R |
|---|---|
| Vial body OD | 24 mm |
| Vial height | 45 mm |
| Bore diameter | 24.8 mm |
| Wall between bores | 3.2 mm |
| Center-to-center pitch | 28 mm |
| Rack height | 28 mm |
| Bore depth | 25 mm (3 mm floor) |
Vial dimensions are nominal per ISO 8362-1 or the common serum-vial equivalent. The bore follows your measured diameter when you give us one.
Capacity and footprint
| Positions | Grid | Footprint | Ships as |
|---|---|---|---|
| 10 | 5 × 2 | 146 × 62 mm | One piece |
| 25 | 5 × 5 | 146 × 146 mm | One piece |
| 50 | 10 × 5 | 286 × 146 mm | Two interlocking halves |
| 100 | 10 × 10 | 286 × 286 mm | Two interlocking halves |
Fit
24.8 mm bore for the 24 mm ISO 10R body. Walls step up to 3.2 mm because a full 10 ml vial is heavier than the small sizes and the rack gets carried loaded.
Where the 10 ml rack earns its bench space
Bacteriostatic water and diluent storage, reconstitution stations, and shipping prep. Pairs with a 2 ml or 3 ml rack in the same color family, or with a mixed-size tray that holds both.
Material options
- PETGDefault
- ASAHeat and sun
- PLABudget, indoor
Not autoclavable, no sterility claims. Detail on the rack hub.