3 ml vial labels: edge-to-edge wrap or hand-apply panel
Same film stocks as our 2 ml wraps. Water, smudge, and abrasion resistant once cured, sized for the slightly larger 17 mm body.
Printed inline in full color on our digital press. No plates, no plate fees, and a 50-label minimum per design, so a short run of 3 ml vial labels costs what a short run should.
3 ml vial dimensions
Nominal per ISO 8362-1 or the common serum-vial equivalent. We cut every die to your measured outside diameter, so send calipers numbers with your quote if your vials differ.
| Nominal designation | 3 ml serum (17 × 39 mm) |
|---|---|
| Body outside diameter | 17 mm |
| Vial height | 39 mm |
| Neck finish | 13 mm |
| Wrap label length | 2.125 in (edge to edge) |
| Usable label height | 1 in |
| Cap circle diameter | 0.5 in |
Fit spec
2.125 × 1 in lands edge-to-edge on 17 mm bodies. 2 × 1 in leaves a deliberate panel gap that shows fill level and applies straight by hand.
Label size: 2.125 × 1 in or 2 × 1 in · dielines on the artwork guidelines page
Material options
White matte film (recommended) or white gloss film. Permanent acrylic standard, freezer-grade adhesive on request.
- White matte film (BOPP): the default for vials
- White gloss film: saturated color, wipeable
- Clear film: dark art only, no white ink
- Freezer-grade adhesive: on request for storage below zero
Full stock guidance on the vial materials guide and the waterproof vial labels page.
Compliance fields
Structured template slots. Fill what applies, omit what doesn't. Content is yours; legibility is ours.
- Product name
- Strength / concentration
- Volume
- Lot number
- Batch number
- Manufactured date
- Expiration / retest date
- QR or barcode
- COA reference
- “For research use only. Not for human use.” (recommended default)
Cap circle stickers
A 0.5 in circle sits inside the flip-off cap of a 13 mm finish with a small margin. Suppliers use it for a color code, a strength, or a second lot mark that survives when the wrap is turned away. Circles under 2 in are cut as a custom die, so request them on the quote form with the wrap and we price the pair together.