Skip to content

Not accepting new orders right now. We are no longer accepting orders at this time. We are currently overbooked. We apologize for the inconvenience and hope to reopen soon.

5 ml vial labels: 3 × 1 in wrap for 22 mm ISO 6R vials

The 22 mm body of a 5 ml vial takes a 3 in wrap on the same cured-pigment film stocks. Water, smudge, and abrasion resistant through repeated handling.

Printed inline in full color on our digital press. No plates, no plate fees, and a 50-label minimum per design, so a short run of 5 ml vial labels costs what a short run should.

5 ml vial dimensions

Nominal per ISO 8362-1 or the common serum-vial equivalent. We cut every die to your measured outside diameter, so send calipers numbers with your quote if your vials differ.

Nominal designation6R
Body outside diameter22 mm
Vial height40 mm
Neck finish20 mm
Wrap label length3 in (overlap)
Usable label height1 in
Cap circle diameter0.75 in

Fit spec

3 × 1 in wraps a 22 mm body with roughly 1/4 in of overlap. Most 5 ml vials sold as ISO 6R measure 22 mm; some molded serum vials run 20 mm, which turns the overlap into a wider seam. Send the measured diameter and we set the die.

Label size: 3 × 1 in · dielines on the artwork guidelines page

Material options

White matte film (recommended) or white gloss film. Permanent acrylic adhesive standard, freezer-grade adhesive on request.

  • White matte film (BOPP): the default for vials
  • White gloss film: saturated color, wipeable
  • Clear film: dark art only, no white ink
  • Freezer-grade adhesive: on request for storage below zero

Full stock guidance on the vial materials guide and the waterproof vial labels page.

Compliance fields

Structured template slots. Fill what applies, omit what doesn't. Content is yours; legibility is ours.

  • Product name
  • Strength / concentration
  • Volume
  • Lot number
  • Batch number
  • Manufactured date
  • Expiration / retest date
  • QR or barcode
  • COA reference
  • “For research use only. Not for human use.” (recommended default)

Cap circle stickers

A 0.75 in circle sits inside the flip-off cap of a 20 mm finish with a small margin. Suppliers use it for a color code, a strength, or a second lot mark that survives when the wrap is turned away. Circles under 2 in are cut as a custom die, so request them on the quote form with the wrap and we price the pair together.

Get Label Quote How It Works